
( Brand: Eaton/cutler Hammer ), ( Manufacturer Part Number: SPD250480Y2C ), ( Voltage Compatibility: 277/480 V ), ( Voltage Rating: 277/480 ), ( Max. Input Current: 200ka ), ( Type: Surge Protector ), ( Unit Type: Unit )
The Eaton/Cutler-Hammer SPD250480Y2C is a high-performance surge arrester designed to protect electrical equipment from voltage surges and transients. This surge arrester is specifically designed for use in 277/480V electrical systems, making it an ideal choice for industrial and commercial applications.
The SPD250480Y2C surge arrester is rated for a maximum continuous operating voltage of 250VAC, with a surge current rating of 200kA. This means that it can withstand significant voltage surges and transients without failing, providing reliable protection for your electrical equipment. The arrester is also designed to operate in both single-phase and three-phase applications, making it versatile and flexible to use in a variety of electrical systems.
The surge arrester features a high-performance metal oxide varistor (MOV) element, which rapidly absorbs voltage surges and transients, preventing them from reaching sensitive electrical equipment. The MOV element is housed in a rugged, corrosion-resistant enclosure, which is designed to withstand harsh environmental conditions and provide long-term reliability. The arrester also has a built-in fuse, which provides an additional layer of protection in the event of a fault or overload.
The Eaton/Cutler-Hammer SPD250480Y2C surge arrester is easy to install and maintain, with a quick-disconnect terminal that allows for easy connection to the electrical system. The arrester is also equipped with a test switch, which allows for routine testing to ensure that it is operating correctly and providing the required protection.
In summary, the Eaton/Cutler-Hammer SPD250480Y2C surge arrester is a high-performance, reliable, and versatile solution for protecting electrical equipment from voltage surges and transients in 277/480V electrical systems. Its rugged design, high surge current rating, and easy installation make it an ideal choice for industrial and commercial applications.
The Eaton/Cutler-Hammer SPD250480Y2C 200kA 277/480V Surge Arrestor is a high-capacity surge protection device designed to safeguard electrical systems from power surges and electrical overvoltages. Here are its pros and cons:
Pros:1. High Capacity: This surge arrestor has a 200kA rating, which is suitable for protecting large electrical systems and industrial applications that require substantial surge protection.
2. Voltage Range: The SPD250480Y2C is compatible with both 277V and 480V systems, making it a versatile choice for various industrial applications.
3. UL Listed: The surge arrestor is UL listed, which means it has been tested and certified by Underwriters Laboratories, ensuring that it meets specific safety and quality standards.
4. Rugged Construction: The surge arrestor is built to withstand harsh environmental conditions, making it suitable for outdoor or indoor applications.
Cons:1. Cost: The Eaton/Cutler-Hammer SPD250480Y2C is a high-performance surge protection device, and its cost reflects its capabilities. It may be more expensive than lower-capacity surge arrestors.
2. Limited Installation Options: The surge arrestor is a wall-mounted device, which may limit its installation options in certain applications where space is limited or where a wall-mounted solution is not practical.
Conclusion:The Eaton/Cutler-Hammer SPD250480Y2C 200kA 277/480V Surge Arrestor is a reliable and high-performance surge protection device suitable for large electrical systems that require substantial surge protection. Its rugged construction, wide voltage range, and UL listing make it a good choice for industrial applications where safety and reliability are critical. However, its cost and limited installation options may make it a less practical choice for smaller electrical systems or applications with space constraints.
Recommendation:If you require high-capacity surge protection for large electrical systems and have the budget and space to accommodate a wall-mounted surge arrestor, the Eaton/Cutler-Hammer SPD250480Y2C is an excellent choice. It offers reliable protection and meets the required safety and quality standards. However, if your electrical system is smaller or if you have space constraints, consider lower-capacity surge arrestors that may be more cost-effective and suitable for your needs.
200kA 277/480V Surge Protective Device comes with HFD3030BP10 Bin: 12K 04, Specs: Manufacturer Cutler Hammer, Manufacturer Part NumberSPD250480Y2C, Product Linseed Series, Full Load Amp NA, voltage NA, Horsepower NA, Condition Used, Norma Type 1, Serial Number/A.: Number SPD250480Y2C.